- 编辑 : 河北卓越专业水利闸门,电动闸门,辽宁、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、山西、四川平面不锈钢闸门,铸铁闸门,钢制闸门,钢闸门,铸铁拍门,钢制拍门,玻璃钢拍门生产厂家哪家好 时间: 2018-12-18 10:04 浏览量: 40
在载荷运转一段工夫后，要停止颐养，把机内新机件磨擦发生的金属沫特别是螺杆、螺母、涡轮、涡杆，要轻洗洁净，涂上光滑油，密封严实，持续运用。The requirement of Xinjiang steel gate device and environmental temperature must insist on the stereoscopic degree of the base arrangement 180 degrees, the contact area between the base of hoist and the stereoscopic arrangement of the base should reach more than 90%, the screw axis should be perpendicular to the degree plane of the cross beam on the gate platform, and should be in accordance with the vertical of the gate hanger ear hole, so as to prevent the screw from tilting and forming part of the mechanical force to damage the machine parts. The utility model is composed of a housing, a cover, a bracket, a nut, a screw, a pressure bearing, a screw, a worm, a worm wheel handle, a motor, an electric appliance, etc. The dual-purpose hoist adopts worm wheel and worm variable speed nut to rotate, which makes the screw move up and down. It has high safety function. The dual-purpose hoist has dual protective measures of torque maintenance and travel limit. It is easy to operate and can complete remote control and field operation, single control and centralized control. After the load runs for a period of time, it is necessary to stop taking care of itself. The metal foam, especially the screw, nut, turbine and scroll, which occurs when the new parts of the machine are friction, should be cleaned and cleaned lightly, coated with smooth oil, sealed tightly and used continuously.